ALE Series

ALE Series - SPECIFICATION

Article Index
ALE Series
SPECIFICATION
Application
All Pages

 

STANDARD SPECIFICATION
  • Discharge air volumes is converted to compressors suction condition (30oC)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 45oC
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.
  • Discharge air volumes is converted to compressors suction condition (30oC)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 45oC
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.
 
  • Discharge air volumes is converted to compressors suction condition (30oC)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 45oC
  • Cooling water temperature should not exceed 35oC
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.
  • Discharge air volumes is converted to compressors suction condition (30oC)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 45oC
  • Cooling water temperature should not exceed 35oC
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.

  • Discharge air volumes is converted to compressors suction condition (30oC)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 45oC
  • Cooling water temperature should not exceed 35oC
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.
  • Discharge air volumes is converted to compressors suction condition (30oC)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 4o5C
  • Cooling water temperature should not exceed 35oC
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.

  • Discharge air volumes is converted to compressors suction condition (30C)
  • Discharge pressure are measured after the check valve.
  • Service factor (SF) of Main Motor is 1.1.
  • Noise values are measured in an anechoic chamber at a height of 1 meter and a distance of 1.5m from the front of the unit and at full load.
  • Since the cooling for the compressed air & the inside of the compressors unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 45C
  • Please be sure to use the lubricating oil recommended by KOBELCO
  • Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation.
  • Appearance and specifications are subject to change without notice.
  • Consult us individually, regarding guaranteed performance values.

 


 

Our Compressors










Our Visitor Counter

TodayToday99
YesterdayYesterday129
This WeekThis Week709
This MonthThis Month1819
All DaysAll Days166434